Received:
2023-09-18 | Accepted:
2023-11-27 | Published:
2023-12-30
Title
Building tomorrow: additive manufacturing unleashing sustainable progress in the US military
Abstract
Additive manufacturing (AM) has recently attracted the attention of academia and private companies, viewing it as a tool for achieving sustainability within the context of sustainable development (SD). As the previous studies revealed an ongoing debate on the sustainable nature of AM, making it challenging to conclude, the primary objective of this article is to explore new perspectives that enhance the contribution of AM to the sustainability vision. Given the limited number of studies considering the potential contribution of AM to specific Sustainable Development Goals (SDGs) and associated targets, this research aims to complete the existing body of knowledge through an in-depth analysis. Furthermore, recognizing that AM could generate some unsustainable effects from a security standpoint, this study investigates how the military organization, with its capacity to mitigate such concerns, could contribute to implementing specific SDGs and targets through AM small and large-scale adoption. Therefore, the study follows a qualitative approach, studying the case of the American military forces in an attempt to reveal the main reasons for adopting AM and the possible contribution to specific SDGs and targets. The results highlight a consistent potential for the US military to contribute to SD, mainly through the large-scale adoption of AM. This measure could reduce their military logistic footprint and provide financial, operational and strategic advantages. While the main findings are presented in a detailed list which supports these conclusions and offers valuable lessons learned, it is essential to acknowledge the limitations of this research – namely, the lack of quantitative evidence. Therefore, to formulate a conclusive judgment on the sustainable nature of AM, future studies should concentrate on assessing financial data from private and public entities, including military organizations.
Keywords
additive manufacturing, sustainability, Sustainable Development Goals, targets, U.S., military
JEL classifications
H56
, L60
, O51
, Q01
, Q53
, Q56
, Q58
URI
http://jssidoi.org/ird/article/150
DOI
Pages
115-134
Funding
This is an open access issue and all published articles are licensed under a
Creative Commons Attribution 4.0 International License
References
Agnusdei, L., Del Prete, A., 2022. Additive manufacturing for sustainability: A systematic literature review. Sustainable Futures, 4, pp. 1-9. https://www.sciencedirect.com/science/article/pii/S2666188822000326?via%3Dihub
Search via ReFindit
Avery, S., 2023. US Navy Partners with SPEE3D to Transform Submarine Manufacturing. https://www.3dnatives.com/en/us-navy-partners-with-spee3d-transform-submarine-manufacturing-0206236/
Search via ReFindit
Azam, M., 2020. Does military spending stifle economic growth? The empirical evidence from non-OECD countries. Heliyon, 6(12), pp. 1-10. https://doi.org/10.1016/j.heliyon.2020.e05853
Search via ReFindit
Blewitt, J., 2018. Understanding Sustainable Development.. Third ed. London & New York: Routledge, Taylor & Francis Group
Search via ReFindit
Braunberger, T., 2020. Providing Rational for Further Funding Additive Manufacturing Efforts in the Air Force. Ohio: Air Force Institute of Technology. https://scholar.afit.edu/cgi/viewcontent.cgi?article=4750&context=etd
Search via ReFindit
Brice, C. et al., 2023. Baseline Additive Manufacturing Readiness, Pase I, Deliverable 7, Guam Additive Manufacturing Feasibility Study for the Guam Economic Development Authority, The Applied Sciences & Technology Research Organization of America. https://www.investguam.com/wp-content/uploads/2023/Reports/Guam%20Baseline%20Additive%20Manufacturing%20Readiness%20Report%20-%20April%202023.pdf
Search via ReFindit
Brimley, S. et al., 2013. Game Changers Disruptive Technology and U.S. Defense Strategy, Center for a New American Security. https://www.files.ethz.ch/isn/170630/CNAS_Gamechangers_BrimleyFitzGeraldSayler_0.pdf
Search via ReFindit
Caulier, S. et al., 2020. An exploratory consumer study of 3D printed food perception in a real-life military setting. Food Quality and Preference, 86, pp. 1-5. https://doi.org/10.1016/j.foodqual.2020.104001
Search via ReFindit
Clemens, M., 2022. Navy Sailors Receive 3D Printed Dental Prosthetics. 3D Natives. https://www.3dnatives.com/en/navy-sailors-receive-3d-printed-dental-prosthetics/
Search via ReFindit
Clemens, M., 2022. The Use of Additive Manufacturing in the Defense Sector. 3D Natives. https://www.3dnatives.com/en/the-use-additive-manufacturing-defense-sector300620224/
Search via ReFindit
Coblens, R., 2022. Powering Additive Manufacturing with an Environmental and Social Impact Commitment. https://www.manufacturingtomorrow.com/story/2021/12/powering-additive-manufacturing-with-an-environmental-and-social-impact-commitment/18015/
Search via ReFindit
Cotteleer, M. et al., 2014. 3D opportunity in tooling: Additive manufacturing shapes the future, Deloitte University Press. https://www2.deloitte.com/content/dam/insights/us/articles/additive-manufacturing-3d-opportunity-in-tooling/3D-opportunity-in-tooling1.pdf
Search via ReFindit
Cox, M., 2012. Mobile Labs Build on-the-Spot Combat Solutions, Military.com. https://www.military.com/daily-news/2012/08/17/mobile-labs-build-on-the-spot-combat-solutions.html
Search via ReFindit
Coykendal, J. et al., 2014. 3D opportunity in aerospace and defense. Deloitte University Press. https://www2.deloitte.com/content/dam/insights/us/articles/additive-manufacturing-3d-opportunity-in-aerospace/DUP_706-3D-Opportunity-Aerospace-Defense_MASTER2.pdf
Search via ReFindit
Dabbagh, S.R., et al., 2022. 3D-printed microrobots from design to translation. Nature Communications,13, pp. 1-24. https://doi.org/10.1038/s41467-022-33409-3
Search via ReFindit
DeRivi, T., 2021. Guam Power Authority bolsters resilience and charts path to 50% renewables. https://www.publicpower.org/periodical/article/guam-power-authority-bolsters-resilience-and-charts-path-50-renewables
Search via ReFindit
Fey, M., 2017. Additive Manufacturing as Security Risk in 3D Printing and International Security, Frankfurt: Peace Research Institute. https://www.jstor.org/stable/resrep14453.6
Search via ReFindit
Food and Agriculture Organization, 2022. Statistical Yearbook World Food and Agriculture, Rome: FAO. https://doi.org/10.4060/cc2211en
Search via ReFindit
Ford, S., Despeisse, M., 2016. Simon Ford, Mélanie Despeisse, Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. Journal of Cleaner Production, 137, pp. 1573-1587. https://doi.org/10.1016/j.jclepro.2016.04.150
Search via ReFindit
Freeman, J. et al., 2015. Additive manufacturing and obsolescence management in the defence context, RAND Europe. https://www.rand.org/content/dam/rand/pubs/perspectives/PE100/PE171/RAND_PE171.pdf
Search via ReFindit
House of Representatives, 2022. National Defense Authorization Act for Fiscal Year 2023. https://docs.house.gov/billsthisweek/20221205/BILLS-117hres_-SUS.pdf/
Search via ReFindit
Inspector General, 2019. Audit of the DoD’s Use of Additive Manufacturing for Sustainment Parts, Washington, D.C.: U.S. Department of Defense. https://media.defense.gov/2019/Oct/21/2002197659/-1/-1/1/DODIG-2020-003.pdf
Search via ReFindit
Joint Chiefs of Staff, 2019. Joint Publication 4-0, Joint Logistics. https://irp.fas.org/doddir/dod/jp4_0.pdf
Search via ReFindit
Joint Defense Manufacturing Council, 2021. Department of Defense Additive Manufacturing Strategy, Washington, DC: Deputy Director for Strategic Technology Protection and Exploitation. https://www.cto.mil/wp-content/uploads/2021/01/dod-additive-manufacturing-strategy.pdf
Search via ReFindit
Kan, S., 2014. Guam: U.S. Defense Deployments. https://sgp.fas.org/crs/row/RS22570.pdf
Search via ReFindit
Kramer, L., 2023. How Does the Law of Supply and Demand Affect Prices?. https://www.investopedia.com/ask/answers/033115/how-does-law-supply-and-demand-affect-prices.asp
Search via ReFindit
Langefeld, B. et al., 2022. Sustainability in Additive Manjufacturing Current status and roadmap to transparent AM, Munich: ROLAND BERGER GMBH. https://www.rolandberger.com/publications/publication_pdf/roland_berger_sustainable_additive_manufacturing.pdf
Search via ReFindit
Leonardo, A., Del Prete, A., 2022. Additive manufacturing for sustainability: A systematic literature review. Sustainable Futures, 4, pp. 1-9. https://www.sciencedirect.com/science/article/pii/S2666188822000326?ref=pdf_download&fr=RR-2&rr=80c32
Search via ReFindit
Louis, J.M. et al., 2014. 3D opportunity in the Department of Defense: Additive manufacturing fires up, Deloitte University Press. https://www2.deloitte.com/content/dam/insights/us/articles/additive-manufacturing-defense-3d-printing/DUP_1064-3D-Opportunity-DoD_MASTER1.pdf
Search via ReFindit
Machado, C., G. et al., 2019. Additive Manufacturing from the Sustainability Perspective: Proposal for a Self-assessment Tool., 52 CIRP Conference on Manufacturing Systems. https://www.sciencedirect.com/science/article/pii/S2212827119304287
Search via ReFindit
Martín Palacios, M.C., 2018. 3D-Printing, An Additive Menace to International Security?, Final Disertation. Madrid. https://repositorio.comillas.edu/jspui/bitstream/11531/22201/1/TFG%20MARTIN%20PALACIOS%2C%20MARIA%20CARMEN.pdf
Search via ReFindit
Masurtschak, S., Almeida, A., 2021. Impact of Additive Manufacturing towards the Environmental Sustainability, Brussels. https://www.skills4am.eu/documents/D8.1%20SAM%20Environmental%20Sustainability_%20VF_4.11.2021.pdf
Search via ReFindit
Mickley, M., Swank, P., Hagen, B., 2021. Navigating Department of Defense Additive Manufacturing Acquisition Practices, California. https://apps.dtic.mil/sti/trecms/pdf/AD1164959.pdf
Search via ReFindit
Montero, J. et al., 2020. A methodology for the decentralized design and production of additive manufactured spare parts. Production & Manufacturing Research, 8(1), pp. 313-334. https://doi.org/10.1080/21693277.2020.1790437
Search via ReFindit
Muniz, B., Peters, K., 2016. An Analysis of Additive Manufacturing Production Problems and Solutions, Monterey: Naval Postgraduate School. https://core.ac.uk/download/pdf/81223363.pdf
Search via ReFindit
Muth, J. et al., 2023. Putting 3D printing to good use—Additive Manufacturing and the Sustainable Development Goals. Frontiers in Sustainability. https://www.frontiersin.org/articles/10.3389/frsus.2023.1196228/full
Search via ReFindit
NATO Standardization Office, 2018. NATO Standard AJP-4 Allied Joint Doctrine for Logistics. https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/907825/doctrine_nato_logistics_ajp_4.pdf
Search via ReFindit
Nelson, A., 2020. Innovation and Its Discontents: National Models of Military Innovation and the Dual-Use Conundrum, Maryland. https://cissm.umd.edu/sites/default/files/2020-07/EmergingTechInnovation_063020.pdf
Search via ReFindit
OECD-FAO, 2023. OECD-FAO Agricultural Outlook 2023-2032, Paris: OECD Publishing. https://doi.org/10.1787/08801ab7-en
Search via ReFindit
Office of the Secretary of Defense, 2018. Summary of the 2018 National Defense Strategy, Washington, D.C.: U.S. Department of Defense. https://dod.defense.gov/Portals/1/Documents/pubs/2018-National-Defense-Strategy-Summary.pdf
Search via ReFindit
Office of the Under Secretary of Defense for Research and Engineering, 2021. DoD Instruction 5000.93 Use of Additive Manufacturing in the DoD, Washington, D.C.: Department of Defense. https://www.esd.whs.mil/Portals/54/Documents/DD/issuances/dodi/500093p.PDF?ver=JM7vpZGnbXAFX5uv91rXOQ%3D%3D
Search via ReFindit
Oonincx, D.G.A.B., De Boer, I.J.M., 2012. Environmental Impact of the Production of Mealworms as a Protein Source for Humans – A Life Cycle Assessment. Plos One, 7(12). https://doi.org/10.1371/journal.pone.0051145
Search via ReFindit
Sanchez-Rexach, E. et al., 2020. Sustainable Materials and Chemical Processes for Additive Manufacturing. Chemistry of materials, 32(17), pp. 7105-7119. https://doi.org/10.1021/acs.chemmater.0c02008
Search via ReFindit
Sher, D., 2021. 3D printed salmon startup Revo Foods gets €1.5M in funding. The Smokey One and The Creamy One veggie salmon products are headed to European markets. https://www.voxelmatters.com/3d-printed-salmon-startup-revo-foods-gets-e1-5-in-funding/
Search via ReFindit
Sher, D., 2022. AM for sustainability: 3D printing a better tomorrow. A down-to-earth analysis of use cases showing how AM can make global production more sustainable. https://www.voxelmatters.com/am-for-sustainability-3d-printing-a-better-tomorrow/
Search via ReFindit
Sonnenburg, H., 2022. Additive Manufacturing's Somewhat Surprising Role in Sustainability. Siemens Advanta. https://www.siemens-advanta.com/blog/additive-manufacturing-sustainability
Search via ReFindit
Stehn, M. et al., 2017. 3D opportunity for Adversaries: Additive manufacturing considerations for national security, Delloite University Press. https://www2.deloitte.com/content/dam/insights/us/articles/3847_3D-opportunity-for-adversaries/DUP_3D-opportunity-for-adversaries.pdf
Search via ReFindit
Tadesse, G., Durieux, S., Duc, E., 2020. Sustainability performance indicators for additive manufacturing: a literature review based on product life cycle studies. The International Journal of Advanced Manufacturing Technology,107, pp. 3109-3134. https://doi.org/10.1007/s00170-020-05249-2
Search via ReFindit
Tadjdeh, Y., 2014. Navy beefs up 3D printing efforts with new ‘Print the Fleet’ program. National Defense Magazine, October, XCIX(731), pp. 1-44. https://digital.nationaldefensemagazine.org/publication/?m=46185&i=434009&p=26&ver=html5
Search via ReFindit
United Nations, 2015. Transforming Our World: The 2030 Agenda for Sustainable Development. https://www.unfpa.org/sites/default/files/resource-pdf/Resolution_A_RES_70_1_EN.pdf
Search via ReFindit
United Nations, 2023. https://sdgs.un.org/goals
Search via ReFindit
Van Huis, A., 2020. Edible Insects, in Herbert L. Meiselman (editor), Handbook of Eating and Drinking. Interdisciplinary Perspectives. Cham: Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-14504-0_123
Search via ReFindit
Verhoef, A.V. et al., 2018. The effect of additive manufacturing on global energy demand: An assessment using a bottom-up approach. Energy Policy, 112, pp. 349-360. https://doi.org/10.1016/j.enpol.2017.10.034
Search via ReFindit
VoxelMatters, 2023. AM Sustainability, How additive fits into a more sustainable future for manufacturing, VoxelMatters. https://www.voxelmatters.com/wp-content/uploads/2023/08/VoxelMatters-VMFocus2023-eBook-Sustainability-AM.pdf
Search via ReFindit
Wohlers, T. et al, 2022. Executive Summary Wohlers Report 2022, 3D Printing and Global Manufacturing, Global State of the Industry, ASTM International. https://wohlersassociates.com/wp-content/uploads/2022/05/2022_ExSum.pdf
Search via ReFindit
Wycisk, E. et al., 2022. Sustainability of Metal Additive Manufacturing. Analysis of the CO2 footprint along the Additive Manufacturing process chain. https://ampower.eu/insights/sustainability-of-metal-additive-manufacturing/
Search via ReFindit